Circulación Inversa Equipo De Perforación ET642

Sea el primero en opinar sobre este producto

Descripción rápida

Circulación Inversa Equipo De Perforación ET642

Circulación Inversa Equipo De Perforación ET642

Doble click en la imagen para abrir/cerrar


Más vistas

  • Circulación Inversa Equipo De Perforación ET642


Circulación Inversa Equipo De Perforación ET642

Información adicional


Caterpillar Tracks
Hydrostatic AWD mobile 4 wheel drive system

Drilling techniques

Reverse Circulation;
Diamond Core;

Hole Depth Capacity*

Reverse Circulation
400m (1300 ft)
(Drill pipe 4’’(101.6 mm) diameter; Hole size- 5¾"(146mm); Hard Rock formation; Compressor: 500Psi
(3.447Mpa) / 1200Cfm (33.98 m3 /m))
* Subject to ground conditions, compressor or mud pump capabilities, type and a quality of drilling equipments used (pipes etc..) and driller skills.

Power Unit

Cummins electronic diesel engine model QSB4.5-4cyl.
Turbocharged water cooled
160 hp – 119 kw @ 2000rpm
11.2 L/hr <> 2.96gal/hr (Operation fuel consumption 6.8 L/hr <> 1.79gal/hr)
Filtering system two stage (Primary @ security)
Emission certification: U.S. EPA Tier 3, EU Stage III
Integrated control safety panel, 24 volts

Fuel tank

227 L <> 60 galls

Hydraulic System

Sauer/Danfoss power unit & components
Pump drive: Two (2) variable displacement piston pumps, load sensing, pressure compensated, and one (1) gear pump dedicated for accessories.
Top drive: automatic constant rotation  power control
Hydraulic tank capacity 227 L. <> 60 gall.
Hydraulic oil cooler
Filtration system (5 micron)
Body valves assembly for complete controls (Tram, positioning and drilling)
Fittings and adapter type <<OSFS & ORB>>
Hydraulic hoses type << M3K mega though &-PolarFlex >>
Automatic lubricator (oiler) for the down the hole hammer
Parker « seal lock » hose and fittings
Integrated safety system, over heat, low levels etc.
Integrated extra hydraulic power supply «hp»

Working temperatures

Constant operation at the temperatures various between - 45 to + 50 degrees Celsius (- 49 F to 122 F).

Undercarriage & Chassis

Tracks mounted steel shoes (Caterpillar)
- Tracks mounted steel shoes
- Track length: 3.48 m <> 137’’
- Track shoes width: 500 mm <> 19.7”
- Pressure applied brake system
- Heavy duty link profile
- Gradability 19° <> 35%
- Ground clearance 380 mm <> 15”
- Travel speed 4.4 km <> 2.6mph
- (4) Heavy duty hydraulic out-riggers (2 front & 2 rear)
- Pipe rack: Removable
Hydrostatic «AWD» & chassis (Independent front & rear steering) mobile
- Two (2) complete axle, and transfer case
- Integrated brake system & parking brake
- Effort ground traction 14500 kg <> 32000 lbs
- Gradability: 19° <> 35%
- Travel speed: High 0 - 8 km <> 0 - 4.9 mph
- Heavy duty rock type tires of 117 cm <> 46”
- Orbitrol steering system
- Heavy duty hydraulic out riggers (2 in front & 2 rear)
- Pipe rack: quick attachment «Removable»
*Cap. 24 rods x 3m <> 10’ x 104 mm <> 4”

Weight and Dimension

Weight - approx. 12 520 kg <> 27 600 lbs (W/out pipe rack)
Mast (feed boom) length - 10.31m <> 35’ -8’’
Width - 2.26 m <> 7’-4’’
Height - 2.90 m <> 9’-6’’

Drill Mast

Drill Head travel length «Stroke»: 23 ft (7 m)
Mast movement "upwards-downwards" by means of a hydraulic cylinder, for fixing of a boring table on the ground for angled drilling
Heavy duty mast structure designed for drill pipe Core: 3.00 m <> 10’; drill pipe RC: up to
6.00 m <> 20’
Feed system hoisting and pull-down power is provided by double link- chain that use (2) powerful hydraulic gear box controlled hydraulically for accurate trust
Pull back: 42,000 lb (19,050 tons )
Top drive mounting plate is equipped with urethane anti-wear slides
Hydraulic drilling table w/hydraulic break out
Swing-extension Jib hydraulic winch
   * Installed on top of mast
   * Secure way to handle drilling rod
   * Hoisting - Hydraulic
   * Rotation Left / Right (110°) – Hydraulic
   * Telescopic extension 1.22 m <> – Hydraulic
   * Hoisting Capacity 544 kg <> 1200 lbs

Drilling Angle

0 to 100°  from the horizontal

Drill pipe length

10 ft (3 m) or 15 ft (4,5 m) or 6 m (20')

Pipe rack

Not On board

Drilling package: Reverse circulation

Drill head: model 9320
Torque capacity: 4751 lb-ft <> 6431 Nm
Rotation speed: 0-250 rpm
Automatic constant rotation power control
Floating spindle for RC
Saving sub and inner tube
RC air swivel
Blow back system
Hyd. Swing break-out and jaws 60-200mm <> 2.36”-7.87”aa
Drill pipe: Hydraulic slip plate
Hyd. Clamp & guide sleeve 60-200mm <> 2.36”-7.87”)
Water injection pump model FMC A04

Rod handling system

Rod Feeder
Rod feeder to load and unload drill rod is mounted on the side
of the mast for handy operation and better production
All functions are hydraulic and controlled from remote panel
Robot Arm Hiab model 026T
Capacity of 430 kg <> 947 lbs
Reach 5.48 m <>10’-00”
360º Rotation
Can manipulate pipes on the ground or in the pipe rack up to 114 mm Ø ( 4½ ‘’)
Wireless remote Control

Control panel

Remote control, ergonomic design for complete operations
Fully electric
Heated remote control with aluminum corpus


Rod handling feeder
Robot arm (Hiab026T)
Automatic winter heating system
Hydraulic hose extreme cold -45°c (M3K mega though & Polar-Flex)
Rotary OR Universal Wet Splitter «RC»
Pipe rack
Water tanks “Aluminum” 454 L.<>120 gall
1 ½ Discharge Air Pressure
Hydraulic Hook Up
Automatic hydraulic oiler for the down the hole hammer
Working lights

Overseas packaging

40 ft container

Inland shipment

  • Circulación Inversa Equipo De Perforación ET642

Información adicional

Etiquetas del producto

Use espacios para separar las etiquetas. Use comillas simples (') para frases.